Portable Fractional CO2 Laser System
The professional portable fractional CO2 laser system has been known to provide some of the most dramatic, age-defying results in the treatment of challenging skin imperfections including wrinkles, fine lines, photodamage, uneven skin tone, and skin laxity, as well as scar treatment, skin tags, and benign tumors. COOLPRETTY portable fractional CO2 laser system features state-of-the-art technology for all aesthetic resurfacing needs.
Coolpretty Portable Fractional CO2 Laser System
Using the power of the CO2 fractional laser, the optimal mix of non-ablative and thermal effects and applicators and treatment modes for highly tailored procedures, COOLPRETTY’s Fractional CO2 laser GCP142 brings unparalleled precision and innovation to the field of dermatology and plastic surgery.
Coolpretty portable CO2 fractional laser system GCP142 is a highly flexible system for removing acne, and pimple marks, removing freckles, and scars, and for anti-aging and coagulation of soft tissue. It allows physicians full control of treatment parameters, including level and depth of ablation and thermal control via pulse duration and mode of energy delivery. This versatility maximizes precision and treatment results while minimizing unnecessary tissue damage.
Intuitive User-friendly Touchscreen
- Easy to learn and quick treatments
- Intuitive interface for fast learning guide
Single Pulse Technology
- Exceptional ablation/coagulation ratio
- Reach the desired treatment depth with a single pulse
Lightweight and Transportable
- Compact design, stable technology, low running costs
- Flexible and economical due to transportation
Repeated Pulse Technology
- Enhanced patient comfort
- Lower chance of side effects
Treatment & Indications
Syringomas
Syringomas are benign tumors, typically found clustered on eyelids, although they may also be found in other body parts. These can be treated by CO2 laser in a safe, and nonscarring method.
Woman`s Health
The women’s health on GCP142 offers a range of minimally invasive solutions for women coping with gynecologic conditions that affect their well-being, confidence, and intimacy.
Scar Revision
The GCP142 allows for advanced treatment of a variety of severely damaged skin lesions which require synergistic coagulation and ablation for advanced resurfacing.
Acne Scars
COOLPRETTY CO2 non-ablative technologies dramatically decrease scars, even very deep ones, as well as repair damaged skin and improve skin tone.
Deep Wrinkles
The COOLPRETTY CO2 non-ablative technologies enable a high rate of improvement for skin damage and skin tone with minimal downtime. This is due to their unique pulse technologies and tailored treatment modes.
Rhynopyhma
Rhinophyma is a disorder causing the development of a large, bulbous nose associated with granulomatous infiltration, commonly due to untreated rosacea. This can be treated with a CO2 laser as a surgical tool.
Fractional non-ablative resurfacing
Non-ablative skin resurfacing procedures use lasers to reduce the signs of aging, improve skin texture, laxity, and tone, and reduce scars and stretch marks. Non-ablative resurfacing is ideal for patients seeking a dramatic improvement in a single session.
Full Range of Advanced Continuous Capabilities
Portable fractional CO2 laser system utilized four types of pulse technology:
Single Pulse Mode
Produces a single pulse of laser energy for more supervised and accurate energy delivery.
Continuous Pulse Mode
Emits one continuous and consistent laser energy, typically used for excision or cutting.
Repeated Pulse Mode
Produces a series of either short or long pulses of laser energy at variable speeds.
Ultra-pulse Mode
Ultra-pulse mode provides the highest peak power with the shortest pulse duration, enabling the deepest penetration with minimal residual thermal damage. This mode is designed for performing ablation without inflammation and achieves highly effective results with minimal downtime and enhanced patient comfort.
Applicators
Fractional Scanner
Versatile fractional scanner for efficient ablative procedures, ideal for skin texture and pigmentation
A fractional scanner is a handheld microprocessor-controlled laser scanner for char-free ablative procedures that allows for rapid coverage of large areas. It is designed for use in a variety of dermatological, cosmetic, and surgical applications. Multiple scanning options are available including square, rectangle, triangle, oval, circle, or ellipse as well as a straight line. The maximum area of the scan is about 20 mm × 20 mm.
The fractional scanner optimizes treatment efficacy by providing higher energy output per pixel in shorter pulses for ablative procedures. The galvanometric scanning motor delivers energy more quickly per scanning area than the CO2 focus applicators, for faster and more efficient coverage of large surface areas.
For Reduce all kinds of scars (hypertrophic scars, depressed scars), age-pigmented freckles, wrinkles, and skin rejuvenation, remove acne and acne marks, and stretch marks.
BEFORE
AFTER
BEFORE
AFTER
Ultra Pulse Applicator
Cut & Coagulate with perfect control, ideal for surgical applications
Coolpretty’s Ultra-Pulse applicator combines cutting and coagulation into a single setting.
Both work synergistically, allowing physicians to perform both actions without having to switch applicators or parameters during procedures.
In “cut” (ablation) mode, pulses emit high peak power, causing immediate ablation of tissue. In “coagulation” (thermal) mode, a longer pulse emits low to modest power, generating heat, which causes blood vessels and tissue to shrink. This sequential-action pulse allows physicians to achieve optimal tissue incision or excision cutting with minimal bleeding as well as reduced patient downtime. Fixed focus applicators of the two spot sizes allow for precise and accurate soft tissue cutting.
For warts treatment,tumor treatment,operation cutting
BEFORE
AFTER
BEFORE
AFTER
Women’s Health
Vagina Applicator 360° Vagina Mirror
For 360′ tightening the vagina and enhancing the elasticity and youthfulness.
Cervix Applicator
Vulva Applicator
For improving the texture and tone of the vulva, enhancing its lubrication and comfort
Technical Parameters
| Professional portable fractional CO2 laser system | |
|---|---|
| Working Mode | single pulse, continuous pulse, repeated pulse, ultra pulse |
| Output Power | 0-60W (adjustable) |
| Laser Type | Sealed-off CO2 laser |
| Laser Wavelength | 10.6μm |
| Divergence Angle | 4mrad |
| Focused Spot Diameter | ≤0.4mm |
| Focal Length of working head | F=75mm (optional) |
| Pulse Width | 0.02-0.99s |
| Indication Beam | Red Diode Laser (650nm,≤5mW) |
| Cooling System | Air Cooled |
| Voltage | 100-130V/200V-230V; 50Hz-60Hz |
| Transmission System | 7-Articulation Joint Spring Arm |
| Environmental Temperature | 5-40℃ |
| Relative Humidity | ＜80% |
| Package Size | 76cm×55cm×35cm |
| CE | CE with LVD and EMC |
| G. W. | 40kgs |
Ready to learn more?
GCP142
User Experience
Metal RF Tube
- Less recovery time
- Long time to use (7-10 years)
- Use air cooling, no need for maintenance
- Energy is even in every dot
7 Scanning Shapes
The CO2 fractional laser system has 7 scanning shapes, the doctor can adjust the scanning shape size to bigger or smaller during treatment according to the treated areas, and minimize the risk of hypopigmentation.
Easy to learn and use with the treatment settings
Technology
The non-ablative laser uses a wavelength that does not cause the water in the tissue to evaporate (ablate) but rather the laser energy heats the tissue in a controlled manner. The rise in temperature stimulates neocollagenesis, a process in which new collagen is produced by the body. Collagen is a fibrous protein that is responsible for giving the skin its elasticity and suppleness. By producing new collagen the skin regains is youthful appearance. Since the treatment does not involve tissue evaporation or ablation, treatment downtime is significantly reduced, which is also why it is preferred over ablative treatments by many patients.
The CO2 laser is a gaseous laser with a wavelength of 10.6 μm that is fully absorbed through human biological tissue (all skin available). The sealed-off fractional CO2 laser, whose output laser light is delivered through an articulated arm, has better direction and higher energy density.
The CO2 laser operates in the invisible infrared waveband, and an aiming beam is required to see where the treatment beam will impact tissue more recently from a visible red diode laser. When the laser beam goes through the focus lens, the produced heat will gasify the target tissue.
With fractional laser resurfacing the laser beam is broken up or fractionated into many small micro beams which are separated so that when they strike the skin surface small areas of the skin between the beams are not hit by the laser and left intact. These small areas of untreated skin promote a much more rapid recovery and healing with less risk of complications. The small areas treated by the fractional micro beams, called micro treatment zones, cause sufficient laser injury to promote new collagen production and resultant facial skin rejuvenation.
Learn more about
Coolpretty portable fractional CO2 laser system.
Get the COOLPRETTY portable fractional CO2 laser system brochure for additional details or download our Brochure.
FAQs
Ablative Fractional Lasers
Ablative Fractional Lasers generate beams of coherent light that are taken in by the body’s tissue as energy. It is administered through a wide range of wavelengths, and in the target area, the energy causes a rise in temperature levels resulting in tissue ablation otherwise known as evaporation. Ablative lasers are effective in treating a wide range of skin conditions by removing all or just part of the skin.
Non-ablative Fractional Lasers
Fractional non-ablative laser is a non-wounding laser treatment that stimulates collagen growth to improve skin tone and texture that gets better through time. This can be done with different types of lasers as well as intense pulsed light devices.
Non-ablative laser systems are less invasive and would only require a less amount of time to recover compared to ablative lasers but it’s not that efficient.
Non-ablative lasers can be used on any skin type and colour, and make-up can often be applied straight after the treatment, making this type of treatment perfect for slotting into a busy day.
Non-ablative laser surgery is the most appropriate choice for individuals who
- Show mild to moderate signs of aging
- Are younger (under 65 years)
- Prefer to have multiple treatments before seeing noticeable results
- A shorter recovery time. (4-5 days)
Those being treated may experience significant redness, broken capillaries, and bronzing in the treatment area for approximately 3-5 days after treatment. This may persist in a mild form for several weeks, particularly in areas other than the face. Once the treatment area has healed, some itching or dryness may occur.
